FreeEMS
0.2.0-SNAPSHOT-285-g028e24c
|
This directory has the axis data for the RPM and Load axes in it.
More...Files | |
file | DefaultForAlphaN-Load.h [code] |
Default Alpha-N load values spaced evenly. | |
file | DefaultWith10and20SplitSpacing-Load.h [code] |
Default load values spaced at 10kPa from 20kPa to 100kPa and 20kPa from 100kPa up. | |
file | DefaultWith400Spacing-RPM.h [code] |
Default RPM values spaced at 400RPM after the cranking and idling rows. | |
file | Deuces3100-Load.h [code] |
Default load values spaced at 10kPa from 15kPa to 105kPa and 20kPa from 140kPa up. | |
file | Deuces3100-RPM.h [code] |
Default RPM values spaced at 400RPM after the cranking and idling rows. | |
file | FredsTruck-Load.h [code] |
The Load axis values for my truck's very rough tune. | |
file | FredsTruck-RPM.h [code] |
The RPM axis values for my truck's very rough tune. | |
file | HotelHyundai-Load.h [code] |
A 16 long set of loads for my hyundai before we have tuning software that supports full tables. | |
file | HotelHyundai-RPM.h [code] |
A default set of RPMs for a typical sohc engine. | |
file | PetersJSeries-Load.h [code] |
The load axis values for Peter's Honda J Series V6. | |
file | PetersJSeries-RPM.h [code] |
The RPM axis values for Peter's Honda J Series V6. | |
file | ScavengersMiata-Load.h [code] |
Hentai's load values spaced at 10kPa from 20kPa to 100kPa and 15kPa from 100kPa up. | |
file | ScavengersMiata-RPM.h [code] |
Default RPM values spaced at 400RPM after the cranking and idling rows. | |
file | SeansLT1-RPM.h [code] |
A default set of RPMs for a worked pushrod v8. | |
file | SimsVolvo-Load.h [code] |
A 16 long set of loads for my truck before mtx supports full tables. | |
file | SimsVolvo-RPM.h [code] |
A default set of RPMs for a B21A engine. | |
file | Slater-Load.h [code] |
A 16 long set of loads for the mighty slater! | |
file | Slater-RPM.h [code] |
A 16 long set of RPMs for the mighty slater! |
This directory has the axis data for the RPM and Load axes in it.