|
FreeEMS
0.2.0-SNAPSHOT-282-g9efc524
|
Ranges for sensors with linear config. More...
#include <FixedConfigs.h>
Data Fields | |
| signed short | MAPMinimum |
| Vacuum required to make the sensor reach 0 Volt output. Theoretical only, most do not rail. | |
| unsigned short | MAPRange |
| Number of kPa between 0 Volts and 5 Volts. | |
| unsigned short | AAPMinimum |
| Vacuum required to make the sensor reach 0 Volt output. Theoretical only, most do not rail. | |
| unsigned short | AAPRange |
| Number of kPa between 0 Volts and 5 Volts. | |
| unsigned short | EGOMinimum |
| Lambda that 0 Volt input corresponds to. | |
| unsigned short | EGORange |
| Lambda difference between what 0V and 5V inputs correspond to. | |
| unsigned short | BRVMinimum |
| Battery Voltage that 0 Volt input means. 0 Volts usually. TODO YAGNI usually? always? what/why? | |
| unsigned short | BRVRange |
| TODO reword when above is fixed. Real world voltage difference between lowest and highest ADC reading (0 to 5V). FreeEMS standard is 24.5 Volts for 1k and 3k9 resistors on a 12v vehicle. | |
| unsigned short | TPSMinimumADC |
| This should be zero, but often isn't, this value is what the TPS input reads with the throttle fully closed. | |
| unsigned short | TPSMaximumADC |
| This should be the maximum ADC value, but often isn't. This value is what the TPS input reads with the throttle fully open. | |
Ranges for sensors with linear config.
Definition at line 98 of file FixedConfigs.h.
| signed short sensorRange::MAPMinimum |
Vacuum required to make the sensor reach 0 Volt output. Theoretical only, most do not rail.
Definition at line 99 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::MAPRange |
Number of kPa between 0 Volts and 5 Volts.
Definition at line 100 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::AAPMinimum |
Vacuum required to make the sensor reach 0 Volt output. Theoretical only, most do not rail.
Definition at line 101 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::AAPRange |
Number of kPa between 0 Volts and 5 Volts.
Definition at line 102 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::EGOMinimum |
Lambda that 0 Volt input corresponds to.
Definition at line 103 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::EGORange |
Lambda difference between what 0V and 5V inputs correspond to.
Definition at line 104 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::BRVMinimum |
Battery Voltage that 0 Volt input means. 0 Volts usually. TODO YAGNI usually? always? what/why?
Definition at line 105 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::BRVRange |
TODO reword when above is fixed. Real world voltage difference between lowest and highest ADC reading (0 to 5V). FreeEMS standard is 24.5 Volts for 1k and 3k9 resistors on a 12v vehicle.
Definition at line 106 of file FixedConfigs.h.
Referenced by generateCoreVars().
| unsigned short sensorRange::TPSMinimumADC |
This should be zero, but often isn't, this value is what the TPS input reads with the throttle fully closed.
Definition at line 107 of file FixedConfigs.h.
Referenced by generateCoreVars(), and initConfiguration().
| unsigned short sensorRange::TPSMaximumADC |
This should be the maximum ADC value, but often isn't. This value is what the TPS input reads with the throttle fully open.
Definition at line 108 of file FixedConfigs.h.
Referenced by generateCoreVars(), and initConfiguration().
1.8.1.2